Job Search

EWI - Global Talent Solutions

Ewi is a specialist recruitment & mobilisation consultancy headquartered in the City of London. We specialise in senior and highly technical positions across the engineering, technology and construction sectors worldwide.

Position - Warehouse/Materials Manager (Onshore Wind Farm)

The Warehouse/Materials Manager Site main job purpose is to ensure that all the materials will be available on time and in the correct conditions to comply with the construction and assembly planning process.

Warehouse/Materials Manager Site coordinates arrival of materials with back office colleagues, will take care of local sourced materials and will also coordinate the materials in containers from port at destination to site (in case a port is involved).

Responsibilities:

Follow up short and long term supply of materials to site to identify potential material shortages.Follow up of the deliveries until windfarm (except major components).Coordinate with Material Handling Leader deliveries from Local Suppliers to the Site Warehouse.Coordinate with Material Handling Leader deliveries from Port (only containers) to the Site Warehouse.Identify possible missing parts/delays and inform the rest of the Logistics + MM Team & Project Team if necessary.Coordinate with Site Planner to ensure needed material is available.Issue purchase requisitions (OR-JDE/PR-SAP) for Spare Parts, Replacements and Technical Notifications.Follow up and control of the orders for spare parts, replacements and technical notifications.Purchase of minor components from Local SuppliersSupport Material Manager (back office) by providing visibility of the real on Site situation.Inform Material Manager (back office) concerning Local Supplier's performanceCreate alarm reports to identify potential future missing materialsReport Site indicators (Commercial Incidences)Identify non consumed materials / spare parts by the end of the project for decision making

Health, Safety and Environmental related responsibilities:

The MM Site must:

* Actively participate in safety walks arounds
* Participate in pre-task assessments of work scope & area: coordination of the daily plan of the day
* Enforce Safety regulations and procedures in all activities
* Review all daily HSE events: accidents, incidents, near-misses, unsafe situations or unsafe behaviours
* Participate in reporting hazards/incidents and with suggestions to reduce accident potential and collaborate in accidents/incidents investigation when necessary
* Report any HSE unsafe situations and unsafe acts observed at site
* Participate in the implementation of the HSE corrective actions (short-term or long-term) Eg. Stop the works until it´s safe to workEstablishing and maintaining a safety an environmental behaviour that includes positive recognition
* Personnel Protective Equipment (PPE) must be worn at all time and inspected frequently before usage to guarantee a safe workspace. Minimum expectations include 100% use of safety glasses, safety boots and head protection outside office areas and vehicles
* The PPE has to be inspected periodically (as per indicated by local rules) by authorized personnel
* Tools and measuring equipment must be inspected prior start work (Note: Tools may need mandatory inspections. Inspections must be completed in order to continue working).

Quality related responsibilities:
* Ensure compliance with all quality standards and legislation
* Report quality deviations occurring during installation, which can cause damage to personnel, environment or property
* Ensure adherence to quality processes at all times, including opening ServiceNow tickets /non-conformity reports (NCR)
* Create possible derogation/engineering approval Service Now

Job requirements:
Career / Job experience:

- Wind Turbine Technician with more than 2 years experience
- Right to work in Sweden
- Valid GWOs and PPEs

If interested and suitable or would like further information regarding this position, please respond directly to Yesim at EWI with an updated CV to [email protected]

ewi is committed to equality in the workplace and is an equal opportunity employer. ewi is acting as an Employment Business in relation to this vacancy.

Read less

Experte Wind & Site Assessment (m/w/d)

Mein Kunde ist ein spezialisiertes Unternehmen im Bereich der Planung von Windenergieprojekten und bietet hochqualifizierte Dienstleistungen zur Unterstützung komplexer Windparkentwicklungen an. Das Leistungsspektrum umfasst Windmesskampagnen, Fachgutachten sowie umfassende Bewertungs- und Beratungsleistungen.

Aktuell wird ein Experte im Bereich Wind & Site Assessment (m/w/d) gesucht. Diese Position ist sowohl am Unternehmensstandort als auch standortunabhängig (remote) möglich.

Deine Aufgaben:Planung und Durchführung von Windmesskampagnen - von der Konzeption über die Installation bis zur Auswertung der MessergebnisseEntwicklung und Optimierung von Windpark-Layouts, um maximale Effizienz zu gewährleistenErstellung von Energieertragsprognosen für die Bewertung von ProjektpotenzialenBerechnung von Schall- und Schattenwurfprognosen zur Einhaltung gesetzlicher VorgabenKoordination und Qualitätsprüfung externer Gutachten in den Bereichen Wind, Schall und Schattenwurf

Dein Profil:Abgeschlossenes technisches oder naturwissenschaftliches Studium (z.B. Wind Engineering, Meteorologie, Physik)Berufserfahrung im Bereich Wind & Site Assessment oder in einer vergleichbaren PositionKenntnisse in WindPro, WAsP und WINDSIM sind von VorteilGute Englischkenntnisse in Wort und SchriftSelbstständige und strukturierte ArbeitsweiseReisebereitschaft für Projekteinsätze

Das wird geboten:Ein spannendes Arbeitsumfeld im Bereich der erneuerbaren EnergienFlexible Arbeitsmöglichkeiten, auch remoteMöglichkeiten zur fachlichen und persönlichen WeiterentwicklungZusammenarbeit in einem engagierten Team mit flachen Hierarchien

Bei Interesse oder Fragen freue ich mich über Ihre Nachricht an [email protected].

ewi is committed to equality in the workplace and is an equal opportunity employer. ewi is acting as an Employment Business in relation to this vacancy.

Read less

Job Title: DCS Engineer (Contractor - 6-12 Months, Germany)

Location: Germany (Site-Based & Remote Work Flexibility)
Contract Duration: 6-12 Months
Industry: Wind Energy & Grid Automation
Start Date: ASAP

About the Role:

We are seeking an experienced DCS Engineer to support a leading multinational OEM in the wind energy and grid automation sector. This contract role will focus on Distributed Control System (DCS) configuration, commissioning, and optimization for renewable energy and grid infrastructure projects across Germany.

Key Responsibilities:

DCS Configuration & Integration - Develop, modify, and optimize control logic and system architecture for wind farms, substations, and grid automation applications.Commissioning & Testing - Oversee on-site commissioning, testing, and validation of SCADA/DCS systems to ensure seamless operation of renewable energy assets and grid automation solutions.Troubleshooting & Performance Optimization - Diagnose and resolve control system issues, implement enhancements, and ensure grid stability and reliability.Technical Support & Compliance - Provide expertise in grid integration, regulatory compliance, and cybersecurity standards.Collaboration & Reporting - Work closely with engineering teams, project managers, and grid operators to ensure project success, delivering detailed documentation and progress reports.

Requirements:

Proven experience as a DCS Engineer in the wind energy, power transmission, or grid automation industries.Strong knowledge of DCS/SCADA systems, including platforms such as GE Mark VIe, ABB Ability, Siemens PCS7, Emerson Ovation, or similar.Expertise in PLC programming, HMI development, and grid control systems.Experience in substation automation, wind farm SCADA, and power system integration.Ability to interpret P&IDs, single-line diagrams, and control schematics.Familiarity with grid compliance standards (e.g., IEC 61850, IEC 61400, IEEE 1547, NERC CIP).Strong analytical and problem-solving skills with a solution-oriented mindset.Fluent in English; German language skills are a plus.Willingness to travel and work on-site as required.

Benefits:

Competitive contractor rates.Opportunity to work with a leading multinational OEM on a high-impact renewable energy project.Potential for contract extension based on project needs.Exposure to cutting-edge technology in wind and grid automation.

If you are a DCS Engineer looking for an exciting contract opportunity in Germany within the renewable energy and grid automation space, apply now!

ewi is committed to equality in the workplace and is an equal opportunity employer. ewi is acting as an Employment Business in relation to this vacancy.

Read less

Position - Technical Field Advisor (TFA) South Korea

Main responsibilities

Technical supervision of turbine installation works, with focus on: o high-risk operations (e.g. crane operations and related lifting equipment),o operations requiring special skills (e.g. bolt torqueing/tensioning),o operations involving CLIENT-owned equipment (lifting yokes and systems);

Formal competencies/prerequisites

Strong technical background in wind turbine installation.Expected to have a solid technical knowledge of the specified turbine model.Needs to have an understanding of technical drawings, lifting plans, risk assessments, work instructions.Fluent in English, verbal and written, including technical vocabulary.Committed to Safety: setting very high safety standards to oneself and co-workers.

Personal skills

Strong leadership skills (team lead level): needs to step up as a leader of a team to supervise, control and direct the work processes of the subcontractor teams. Needs to stop the work or intervene in case of a safety risk.A proactive and solution-oriented mindset with ownership and responsibility towards the work, the people involved and towards CLIENT values.Self-driven & self-motivated personality.Willingness to work odd hours and show flexibility in rotation timing if on-site activities require.Willingness to travel and stay abroad on sites for extended time.

If you're interested in this role please apply or send your CV to [email protected]

ewi is committed to equality in the workplace and is an equal opportunity employer. ewi is acting as an Employment Business in relation to this vacancy.

Read less

Commissioning Engineer - T&D (Contract)

Location: UK & Europe (Onshore & Offshore roles available)
Contract Duration: 6-12 months
Start Date: ASAP

Job Overview:
We are collaborating with an international OEM to hire a Commissioning Engineer for a contract opportunity focused on Transmission & Distribution (T&D) systems in the wind industry. The successful candidate will work on both onshore and offshore wind farm projects across the UK and Europe, overseeing the commissioning of electrical systems, including substations, high-voltage cables, transformers, and grid connections, ensuring systems are safely integrated and fully operational.

Key Responsibilities:

Lead and manage the commissioning of electrical T&D systems for onshore and offshore wind farm projects.Perform system integration testing (SIT) and ensure proper communication between T&D systems and wind turbines.Troubleshoot and resolve commissioning issues related to T&D infrastructure.Review and verify commissioning documentation, including test reports, manuals, and system configurations.Ensure compliance with safety standards, industry regulations, and project specifications during commissioning.Provide on-site technical support during the installation and commissioning phases of T&D projects.Develop and maintain operational procedures, maintenance schedules, and documentation for T&D systems.

Requirements:

Bachelor's degree in Electrical Engineering or related field.Proven experience in commissioning electrical T&D systems, preferably within the wind or renewable energy sector.Knowledge of electrical systems such as substations, transformers, high-voltage cables, and grid connections.Familiarity with commissioning processes, system integration testing (SIT), and troubleshooting of electrical systems.Experience with both onshore and offshore wind farm projects.Strong communication skills and ability to collaborate with project teams and OEMs.Fluent in English; additional languages are an asset.Willingness to travel to various UK and Europe-based sites.Offshore certification (e.g., BOSIET, CA-EBS) for offshore roles.

Valid right to work in the UK and/or Europe

ewi is committed to equality in the workplace and is an equal opportunity employer. ewi is acting as an Employment Business in relation to this vacancy.

Read less

MCU Supervisor JapanSUMMARY

The Major Operations Supervisor responsibilities are to assure that all the Major Operations (Cranes works) program for the region is executed according to time line, customer expectations, achieving the highest standard of quality and consistency while all the EHS rules and safe procedures are compliance

ESSENTIAL DUTIES AND RESPONSIBILITIES:Participate actively in each Majors Operation, supervising all the stages, preparation, coordination, execution, and Also support in the development of the new tools & methodology to increase efficiency, increase safety for all operations under Majors operation responsibility. You may also be required to insure supervision work during project installation phase.Coordinate site activities and work closely with other Client Wind Organizations (PS&W, PM, GFO, Parts, Tools, EHS, etc…) during the operation. Provide feedback and contribute to best practices reducing risks to zero and assure continues improvement for allReview all documentation and provide input as and when necessary relative to Major Operations (cranes works) activities when while following best practices and safeProvide technical and process implementation, sharing know-how, supporting new regions while assuring standardization is

Perform statistical analysis of cycle time, and provide recommendations, share best practices, to improvePerform other duties as

KNOWLEDGE, SKILLS AND ABILITIES:Experienced level. Has the knowledge and skill to oversee outage management within a competency and may possesses expertise in a secondary competency. Demonstrates mentor and team leadGood knowledge & experience in Wind turbine equipmentStrong I.T Skills ''Excel & Word'' and familiarization with ERP systemsAbility to lead changeGood organization senseLeadership skillsAccountable and committedCost oriented, organized, resourceful and proactive

EDUCATION and/or EXPERIENCE:Technical/University degree or qualifyingProven experience in O&M, commissioning, installation activities with related crane activities "Majors Operations".Sound knowledge and expertise in field, excellent Interpretation of lifting plansUse to work with heavy lift, in challenging conditionsCertified in handling & rigging activities.Technically experienced in electro-mechanicalValid driver'sPhysically fit to climb WTG towers on a daily basis.English language required, other languages will beWillingness to travel as required for business

ewi is committed to equality in the workplace and is an equal opportunity employer. ewi is acting as an Employment Business in relation to this vacancy.

Read less

MCU Supervisor AustraliaSUMMARY

The Major Operations Supervisor responsibilities are to assure that all the Major Operations (Cranes works) program for the region is executed according to time line, customer expectations, achieving the highest standard of quality and consistency while all the EHS rules and safe procedures are compliance

ESSENTIAL DUTIES AND RESPONSIBILITIES:Participate actively in each Majors Operation, supervising all the stages, preparation, coordination, execution, and Also support in the development of the new tools & methodology to increase efficiency, increase safety for all operations under Majors operation responsibility. You may also be required to insure supervision work during project installation phase.Coordinate site activities and work closely with other Client Wind Organizations (PS&W, PM, GFO, Parts, Tools, EHS, etc…) during the operation. Provide feedback and contribute to best practices reducing risks to zero and assure continues improvement for allReview all documentation and provide input as and when necessary relative to Major Operations (cranes works) activities when while following best practices and safeProvide technical and process implementation, sharing know-how, supporting new regions while assuring standardization is

Perform statistical analysis of cycle time, and provide recommendations, share best practices, to improvePerform other duties as

KNOWLEDGE, SKILLS AND ABILITIES:Experienced level. Has the knowledge and skill to oversee outage management within a competency and may possesses expertise in a secondary competency. Demonstrates mentor and team leadGood knowledge & experience in Wind turbine equipmentStrong I.T Skills ''Excel & Word'' and familiarization with ERP systemsAbility to lead changeGood organization senseLeadership skillsAccountable and committedCost oriented, organized, resourceful and proactive

EDUCATION and/or EXPERIENCE:Technical/University degree or qualifyingProven experience in O&M, commissioning, installation activities with related crane activities "Majors Operations".Sound knowledge and expertise in field, excellent Interpretation of lifting plansUse to work with heavy lift, in challenging conditionsCertified in handling & rigging activities.Technically experienced in electro-mechanicalValid driver'sPhysically fit to climb WTG towers on a daily basis.English language required, other languages will beWillingness to travel as required for business

ewi is committed to equality in the workplace and is an equal opportunity employer. ewi is acting as an Employment Business in relation to this vacancy.

Read less

EWI - Global Talent Solutions

Ewi is a specialist recruitment & mobilisation consultancy headquartered in the City of London. We specialise in senior and highly technical positions across the engineering, technology and construction sectors worldwide.

Job Summary:

The Wind Turbine Commissioning Technician will play a crucial role in ensuring the successful installation, testing, and commissioning of wind turbines at our various project sites. As an experienced professional in wind energy, you will be responsible for overseeing and executing the commissioning process, ensuring that the turbines are operational, efficient, and meet the highest safety standards.

Responsibilities:

Lead the commissioning process for wind turbines, including pre-commissioning, testing, and final commissioning stages, ensuring all tasks are completed within project time lines.Conduct detailed inspections and functional tests of wind turbine components, such as blades, generators, control systems, and electrical connections, to verify compliance with specifications and regulations.Collaborate with cross-functional teams, including project managers, engineers, technicians, and subcontractors, to coordinate commissioning activities and address any technical issues that may arise.Develop and implement commissioning plans and procedures, considering manufacturer guidelines, industry standards, and project-specific requirements.Demonstrate a very good understanding of the scope of commissioning, maintenance, and evaluation of customer's equipment and systems, among others.Perform diagnostic tests and troubleshooting to identify and rectify mechanical, electrical, or software-related faults in wind turbine systems.Monitor and evaluate the performance of commissioned wind turbines to optimise their efficiency and output.Provide technical expertise and guidance during the construction and installation phases to ensure compliance with commissioning standards.Document all commissioning activities, including test results, observations, and equipment inspections, and prepare comprehensive reports for project stakeholders.Conduct training sessions and knowledge sharing activities to enhance the skills of the operations and maintenance teams.Stay updated with industry trends, technological advancements, and relevant regulations to incorporate best practices into the commissioning process.

Qualifications:

A minimum of 10 years of experience in onshore wind turbine commissioning projects.Direct drive experienceIn-depth knowledge of wind turbine technologies, components, and control systems.Strong understanding of commissioning processes, industry standards, and safety regulations.Very good understanding of the scope of commissioning, maintenance, and evaluation of customer's equipment and systems, among others.Proficiency in conducting diagnostic tests and troubleshooting complex mechanical, electrical, and software issues related to wind turbines.Ability to read and interpret technical drawings, schematics, and specifications.Excellent organisational and project management skills to handle multiple commissioning projects simultaneously.Effective communication skills to collaborate with internal and external stakeholders and convey technical information clearly.Detail-oriented mindset with a focus on quality and precision in all commissioning activities.Flexibility to travel to various project sites and work in challenging environments as required.Relevant certifications in wind turbine commissioning or related fields are preferred.College's degree in electrical related;Fluent English in both spoken and written;Ability to work in a construction environment making use of established safety procedures and personal protective equipment. Hands-on applications will require ability to climb vertical ladders in wind turbine towers and work at heights of greater than 100 meters.Excellent customer, communication, and interpersonal skillsAbility to work independentlyAbility to travel overnight domestically and internationallyFully training courses of commissioning technician

ewi is committed to equality in the workplace and is an equal opportunity employer. ewi is acting as an Employment Business in relation to this vacancy.

Read less

SITE ADMINISTRATOR - JAPANESE SPEAKING

Key Accountabilities

· Provide support to Site Construction Manager and team.

· Address all site based administrative and transactional tasks.

· Provide training and support for client new employees as required.

· Support visitors and new starters.

· Attend the Site Administrator meetings.

· Provide reports/meeting minutes as required.

· Support Management and fellow team members as required.

Staff:

· Strong relationship with Site Construction Manager

· Strong relationship with Site team, client representative, senior manager.

· Strong relationship with project manager and assistant project manager.

Administration:

· Prepare outgoing mail and freight. Record information of incoming stock items, including checking quantities, recording locations, filing.

· Set-up vendors and negotiate rates.

· Organise accommodation, travel arrangements, site vehicle for site team.

· Raise, maintain and reconcile site-based Purchase Orders along with Purchase Order register.

· Reconcile expenses, including corporate credit cards and maintain corporate card expense register.

· Organize annual training for client Site based employees.

· Accurately capture / minute for all site-based meetings.

· Support Site Construction Manager, QSE Professional and QSE Administrator to ensure all reports are prepared in an accurate and timely manner.

· Arrange all Emergency equipment required for Site. First aid kits, emergency response team PPE, radios etc.

· Provide support to the Construction Manager as required.

· Support Site Construction Manager, QSE Professional and QSE Administrator to ensure compliance of WHSMP, ERP & CEMP documentation is maintained.

· Support Site Construction Manager, QSE Professional and QSE Administrator to ensure all Site Based registers are maintained and accurate.

· Raise, maintain and reconcile Site based Purchase Orders for Non-Conformance Reports.

Critical Personality Attributes:

· Initiative.

· Self-motivated; self organised.

· Team / group orientated.

· Energetic and enthusiastic.

· Objective.

ewi is committed to equality in the workplace and is an equal opportunity employer. ewi is acting as an Employment Business in relation to this vacancy.

Read less

Position - Installation Supervisor

Main responsibilities

Technical supervision of turbine installation works, with focus on: o high-risk operations (e.g. crane operations and related lifting equipment),o operations requiring special skills (e.g. bolt torqueing/tensioning),o operations involving CLIENT-owned equipment (lifting yokes and systems);

Formal competencies/prerequisites

Strong technical background in wind turbine installation.Expected to have a solid technical knowledge of the specified turbine model.Needs to have an understanding of technical drawings, lifting plans, risk assessments, work instructions.Fluent in English, verbal and written, including technical vocabulary.Committed to Safety: setting very high safety standards to oneself and co-workers.

Personal skills

Strong leadership skills (team lead level): needs to step up as a leader of a team to supervise, control and direct the work processes of the subcontractor teams. Needs to stop the work or intervene in case of a safety risk.A proactive and solution-oriented mindset with ownership and responsibility towards the work, the people involved and towards CLIENT values.Self-driven & self-motivated personality.Willingness to work odd hours and show flexibility in rotation timing if on-site activities require.Willingness to travel and stay abroad on sites for extended time.

If you're interested in this role please apply or send your CV to [email protected]

ewi is committed to equality in the workplace and is an equal opportunity employer. ewi is acting as an Employment Business in relation to this vacancy.

Read less